Mikron HSM 700
Effective chip managementCrane loading is easyObserve the processing process with good visionFlexible workpiece automation deviceHigh-performance machine tool control system
key point
specification
Explanation
Effective chip management
Crane loading is easy
Observe the processing process with good vision
Flexible workpiece automation device
High-performance machine tool control system
|
Main specifications |
| X, Y, Z stroke |
700 x 600 x 500 mm
|
| Rotating axis Tilt axis |
- / - °
|
| Work spindle (40% ED, S6) |
42000 (HSK-E40) / 13.5 / 4.2 rpm / kW / Nm
|
| Rapid movement X, Y, Z |
20 / 40 m / min
|
| Move fast (turn, rotate) |
- / - rpm
|
| Clamping surface & sol; maximum load |
900x600 / 800 mm / kg
|
| Tool magazine |
15 / 30 (HSK-E50) piece
|
| Automation pallet size number mm piece |
-
|
| Automation-maximum load (including pallet) |
-
|
| Control unit Heidenhain |
iTNC 530 HSCI
|
Experience has shown that, especially for the application conditions of small milling cutters required for processing tools, only cutting speeds higher than 40'000 min-1, high-speed feed and the most full use of acceleration can truly reflect the advantages of high-speed milling. These basic requirements need to adjust the design and production of all parts of the machine tool to make them all meet the HSC technical requirements. This is why Mikron's full range of HSM machine tools are designed and manufactured based on the principle of high-speed milling technology from the machine tool basic structure, high-speed spindle, numerical control system, feed drive, mechanical structure of each machine tool axis and automatic control system.
EN
CN
