Mikron MILL S 400
Rigidity with the highest dynamics: even under changing load conditions, the rigidity and vibration damping of the
key point
specification
Explanation
Rigidity with the highest dynamics: even under changing load conditions, the rigidity and vibration damping of the tool base ensure extremely smooth movement of the tool center point. The machine tool has all the capabilities required to process a variety of workpieces: perfect surface quality, excellent processing time and a long tool life
Innovative thermal management: The Mikron MILL S series has brought precision cutting to a new era through sophisticated cooling systems and sophisticated electronic assistance
The integrated automation solution solves the heat problem: a variety of optional flexible automation systems, excellent ergonomics for precise machine setting, and different general machine tool reliability are the key factors to ensure continuous production-far exceeding your successful needs
Main specifications |
X, Y, Z stroke |
500 x 450 x 360 mm
|
Rotating axis Tilt axis |
- / - °
|
Work spindle (40% ED, S6) |
42 000 (HSK-E40) / 13.5 / 8.8 rpm / kW / Nm
|
Rapid movement X, Y, Z |
61 m / min
|
Move fast (turn, rotate) |
- / - rpm
|
Clamping surface & sol; maximum load |
120 kg
|
Tool magazine (including pallet) |
20 / 40 (HSK-E32)
18 / 36 / 68 / 168 / 308 (HSK-E40) piece
|
Automation pallet size number mm piece |
GPS 10 | Dynafix / UPC / 7
|
Automation-maximum load (including pallet) |
90 kg
|
Heidenhain |
iTNC 530 HSCI
|
The Mikron MILL S series makes it easy to discharge chips into new areas accurately. Accurately following the specified tool path, even at high feed rates, ensures the surface quality of the final uneven surface. Therefore, for many customers, it is texture milling-or, more precisely, what the workpiece lacks-that is one of the most important performance characteristics of Mikron machine tools. Because the drive combination device is in a high feed rate state for a long time, it always generates high heat, and the Mikron MILL S series has an advanced thermal management system. Each linear axis and circular slewing device has its own cooling circuit. This ensures that the heat from the machine tool can be discharged from the system without dissipating or remaining in the machine tool. Therefore, the stable geometric accuracy ensures extremely high repeatability of the moving guide. The Mikron MILL S 400 series has set a new milestone in these two aspects.